What To Know
- This guide will walk you through the steps of how to replace Fitbit Charge 2 screen so you can get back to tracking your activity and sleep with a crystal-clear display.
- A spudger is a plastic tool used to pry open the case without damaging it.
- Use your Phillips screwdriver to remove the four screws on the back of the Charge 2.
Are you tired of a cracked, scratched, or unresponsive screen on your beloved Fitbit Charge 2? Don’t throw it away just yet! Replacing the screen is a relatively simple process that can breathe new life into your fitness tracker. This guide will walk you through the steps of how to replace Fitbit Charge 2 screen so you can get back to tracking your activity and sleep with a crystal-clear display.
Gather Your Tools and Materials
Before we dive into the replacement process, let’s gather everything you’ll need:
- Replacement Fitbit Charge 2 Screen: You can find these online from various retailers, including Amazon and eBay. Make sure to choose a screen that’s compatible with your Charge 2 model.
- Small Phillips Screwdriver: This is essential for removing the screws that hold the Charge 2 together.
- Spudger Tool: A spudger is a plastic tool used to pry open the case without damaging it. You can find them at electronics repair stores or online.
- Tweezers: Tweezers will help you carefully remove and insert small components.
- Cleaning Cloth: A microfiber cloth will help you clean the screen and other components.
- Optional: Anti-Static Wrist Strap: This helps prevent static electricity from damaging the sensitive electronics inside the Charge 2.
Step-by-Step Guide to Replacing the Fitbit Charge 2 Screen
Now, let’s get started with the replacement process:
1. Power Off and Remove the Band:
Begin by powering off your Fitbit Charge 2. Then, carefully remove the band by pressing the release buttons on each side of the tracker.
2. Unscrew the Back Case:
Use your Phillips screwdriver to remove the four screws on the back of the Charge 2. These screws are usually located at the corners of the case.
3. Pry Open the Case:
Place the spudger tool between the back case and the front bezel. Gently pry the case open, starting from one corner and working your way around the edges. Be careful not to apply excessive force to avoid damaging the case or the internal components.
4. Disconnect the Battery:
Once the case is open, you’ll see the battery connector. Carefully disconnect the battery by gently lifting the small plastic tab on the connector. This will prevent any short circuits during the screen replacement.
5. Remove the Old Screen:
The old screen is attached to the front bezel. Use your spudger tool to carefully pry the screen away from the bezel, starting from the edges. Be gentle to avoid damaging the screen or the bezel.
6. Install the New Screen:
Align the new screen with the front bezel and carefully press it into place. Make sure the screen is properly seated and there are no gaps or air bubbles.
7. Reconnect the Battery:
Reconnect the battery connector by gently pressing it back into place. Ensure a secure connection.
8. Close the Case:
Carefully align the back case with the front bezel and press it closed. Make sure the case is securely closed and all edges are flush.
9. Screw Back the Case:
Use your Phillips screwdriver to screw the four screws back into the back case. Tighten them securely, but avoid overtightening.
10. Reattach the Band:
Reattach the band to the Charge 2 by sliding it into the slots on each side. Make sure the band is securely attached.
11. Power On and Test:
Power on your Fitbit Charge 2 and check if the new screen is working correctly. Test the touch sensitivity, brightness, and overall functionality.
Troubleshooting Tips
If you encounter any issues during the replacement process, here are a few troubleshooting tips:
- Screen Not Responding: Make sure the new screen is properly seated and there are no gaps or air bubbles. If the problem persists, try cleaning the screen connector with a cotton swab dipped in rubbing alcohol.
- Battery Not Charging: Double-check that the battery connector is securely connected. If the problem persists, you may have a faulty battery.
- Case Not Closing Properly: Ensure that all edges of the case are aligned and flush. If the problem persists, you may need to adjust the case slightly.
Final Thoughts: A Renewed Fitbit Charge 2
Congratulations! You have successfully replaced the screen on your Fitbit Charge 2. You can now enjoy a clear and responsive display, allowing you to track your fitness progress with ease. Remember to handle the device with care and avoid dropping it to prevent further damage.
Top Questions Asked
Q: Where can I find a replacement screen for my Fitbit Charge 2?
A: You can find replacement Fitbit Charge 2 screens online from various retailers, such as Amazon, eBay, and specialized electronics repair stores.
Q: Is it difficult to replace the Fitbit Charge 2 screen?
A: With careful attention to the steps and using the right tools, replacing the Fitbit Charge 2 screen is a relatively straightforward process. It should be manageable for most people with basic DIY skills.
Q: What should I do if the screen still doesn’t work after replacement?
A: If the screen still doesn’t work after replacement, it’s possible that the new screen is faulty or there’s a deeper issue with the device. You may need to contact Fitbit support or a professional repair service for further assistance.
Q: Can I void the warranty by replacing the screen myself?
A: Replacing the screen yourself might void the warranty, so it’s best to check the warranty terms and conditions before proceeding.
Q: How long does it take to replace the Fitbit Charge 2 screen?
A: The entire process, from gathering tools to testing the new screen, can take approximately 30-45 minutes, depending on your experience and the complexity of the repair.
